Fixed Anodised Aluminium Threshold Ramp for fixing on a step or a threshold supplied with a leg kit for height differences up to 70mm - 254mm (3" - 10") and a 300mm or 600mm long entry plate. Ramp available in the lengths from 2ft up to 8ft.
The leg kit allows the ramp to be put flush to the step, without putting any weight on the step. The hinged entry plate will allow easy entry over a threshold, through sliding doors and/or inward opening doors. Due to the safety edges this product might not work well on outwards opening doors.
Please note capacity of the entry plate is only 250kg, however capacity of the ramp section will be 400kg
The Internal entry plates will have a max height of 70mm for the 300mm long and 120mm for the 600mm long plate, the external max height will depend on the length of ramp selected.
Please note measure the height of the internal drop and the depth of your step to make sure the entry plate is long enough for the application.
Once the ramp length and entry plate length option are selected, price for the item will be displayed at the top right of the page.
Assembly required, instructions for the leg kit can be seen here. Instructions for assembling the plate can be found here.
Length (ft) | 2 - 8 |
---|
Width (mm) | 715 - 790 |
---|
Max. Load Height (mm) | 70 - 200 |
---|
Capacity (kg) | 250 - 400 |
---|